Modular Raised Floor Rental for Stands

Raising a stand by a few centimetres changes everything: cables disappear, the floor becomes perfectly level and the space immediately stands out from the aisles. Modular technical flooring rental brings this stable, attractive base to your stands, low stages, showrooms and VIP areas, indoors and outdoors. Solutions Événements delivers and installs these made-to-measure floors across Île-de-France and in the Oise, with 24-hour, 7-day availability to meet trade show set-up slots.


The make-up of a technical floor
The system rests on jacks or adjustable feet, a grid of aluminium beams and floor panels in composite wood or aluminium, generally in a 1 x 1 m or 0.50 x 0.50 m format. The finished height ranges from 5 to 30 cm depending on the configuration, leaving a technical void to route electricity, network and fluids without any protrusion. Accessible ramps for people with reduced mobility, stair nosings and perimeter skirting complete the assembly. The final covering (carpet, vinyl, laminate flooring) is laid directly on the panels.


Situations where a raised floor is essential
- Trade show stands: visual differentiation and cable routing for screens and lighting.

- Outdoor spaces: levelling a sloping ground, a lawn or paving to install a tent or furniture.

- Low stages and catwalk podiums, conference risers.

- Car showrooms and exhibitions of heavy products requiring a load-bearing surface.

- VIP areas and festival lounges, pop-up terraces.


The natural ally of aluminium frame structures
Technical flooring pairs particularly well with our Matrix aluminium frames: once the floor is levelled, the frames stretched with printed fabric attach to it with perfect precision, for partitions and totems that stand perfectly plumb. Connectors and corners let you draw L-shaped, U-shaped or island volumes above the floor grid, while Matrix frame accessories (feet, shelves, lighting) make use of the technical void for an invisible power supply.


Study, installation and collection of the floor
Every floor is laid out from your plan: we determine the grid, the height, the permissible load and the access points. Our fitters install the structure with laser levelling, lay the panels and the covering, then take everything back at the end of the event; cleaning of the panels is included in the service. Small surfaces (under 20 m²) can be collected by your team through our Drive (pick-up) service at our warehouse. Prices are quoted for a 1 to 3-day rental period, with a decreasing rate for trade shows lasting a week or more. As the surface, the height and the type of covering are specific to each project, send us your plan to receive a tailored quote within 24 hours.


Discover also
Find all our modular aluminium frame systems to build partitions, totems and stands around your floor.


What load can the technical floor support?
Standard floors generally accept 500 kg/m² distributed, which covers almost every event use. For a vehicle or a machine, we reinforce the grid and adjust the spacing of the feet.


Is the floor suitable for sloping or uneven ground?
Yes, that is one of its main strengths: the adjustable feet compensate for differences in level of several dozen centimetres and correct the irregularities of a lawn or paving. We survey the ground before installation.


Is access for people with reduced mobility required?
As soon as the floor exceeds 2 cm in height, an accessible ramp is required in venues open to the public. We systematically include it in our proposal, with the regulatory gradient.


What set-up time for a 50 m² stand?
Two fitters lay a 50 m² floor with its covering in around three to four hours, depending on the height and the number of ramps. We often intervene the day before opening to leave the way clear for the other trades.

expand_moreread more